Avaya BCM 2.0 Programming Uživatelská příručka stáhnout pdf (Strana 97)

Configuring Enterprise Edge Services 97

P0911588 Issue 01 Enterprise Edge 2.0 Programming Operations Guide

The Enterprise Edge Analog Terminal Adapter (ATA 2), BRI S-terminals, or a

portable cannot process more than 2 simultaneous calls.

There is a suggested limit of 4 keys per set. You can program more than 4 keys on

a set by programming less than 4 on other sets. For instance, you might program 20

keys on a receptionist set equipped with a CAP.

Line pool access

The Line pool access setting allows a telephone to access one or more of the fifteen

line pools available (A to O). Six exclusive line pools (PRI-A to PRI-F) are

available for PRI lines. Only three are currently supported.

Only PRI or BRI-QSIG lines can belong to a PRI pool. PRI lines cannot belong to

Line Pools A through O, and all lines on a single EE-DTM (PRI) belong to the same

pool. Lines from multiple EE-DTM (PRI) can belong to the same pool if they are

configured with the same protocol. You can assign PRI lines topools with the Line

type setting.

To assign a line pool to a telephone:

1. Choose Services, Telephony Services, Terminals & sets.

2. Click the telephone set (DN 221-528).

3. Choose Line access, Line pool access.

4. Click the Add button above the navigation tree.

5. Enter a letter from A to O.

Tips

In general, you do not assign auto-answer loop start trunks, auto-answer T1

E&M trunks and T1 DID trunks to telephones. If assigned, they are used for

monitoring incoming call usage, or for making outgoing calls (auto-answer

loop start and T1 E&M trunks).

You cannot assign a line that is private to another telephone.

Each line assigned to appear at a telephone must appear at a button with an

indicator on that telephone. The maximum number of line buttons is 8 for the

M7208 telephone, 10 for the M7310 telephone, and 24 for the M7324

telephone.

If you set a line to Ring only, incoming calls appear on an intercom button.

A central answering position (CAP), with one or two CAP modules, can

provide extra line buttons if more than 24 lines are assigned to the CAP. The

remaining lines appear at buttons on the CAP module.

The M7100 telephone is an exception; it has no line buttons and can be

assigned any number of lines. Make sure that lines assigned to an M7100

telephone are assigned to ring; otherwise, you cannot detect incoming calls on

the lines.

1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 445 446

Žádné komentáře

Avaya BCM 2.0 Programming Uživatelská příručka Strana 97