
23
Release Notes for BayStack Operating System Switching Software (BoSS) 3.1
• Using the Web Interface, you may only change the EAPoL Re-Authentication
Field for individual ports. As a workaround, you may use the Console
Interface menu system, or the NNCLI. (Q00636903)
• Using the Web interface, you cannot configure flow control for BS450 in a
mixed stack. Use the NNCLI or console interface. (Q00628278)
• When using SNMP V3, you may only assign a notify-view address to one
user. You may not use the same target IP address for multiple users.
(Q00615644)
• During the download process, the console may appear to hang. You can verify
that the download is in progress by the state of the LEDs. You may see the
following error message:
% error accessing image file
but the download will continue. (Q00596530)
• You cannot disable port mirroring through the console interface. Use another
interface. (Q00620633)
• If you default a unit and re-enter the same IP station addresses that were in the
ARP table, you may not be able to manage the switch. Either manage the
switch from another station, or reboot the stack. (Q00565566)
• The ShapingQDrops parameter is not supported in Device Manager for the
BayStack 470 switches. (Q00647900)
• There may be STP convergence issues with Multilink Trunking when there is
an STP priority/port path cost change, with uplink to the 8600. To correct this
problem, disable and re-enable MLT. (Q00604730).
Downloading BoSS 3.1 software
To obtain the BoSS 3.1 software that does not contain SSH, download the
following files from the Nortel Networks customer support web site at:
http://www.nortelnetworks.com/support
• boss31078.img
Note: Ensure that you do not interrupt the download process; do not
detach either the power cord or any of the network connections during
download.
Komentáře k této Příručce