Avaya BayStack Operating System Switching Software (BoSS 3.1) for BayStack 460, 470 Oznámení stáhnout pdf (Strana 80)

215148-D

Display date of manufacture and HW deviation number in

WEB/CLI/Console

The System Characteristics screen in the console interface, the show sys-info

command in the CLI, and the Switch Information page of the web interface now

display the following information: HW rev, FW rev, date of manufacture (DOM),

and HW deviation number. In stack mode, this information is displayed in the

stack information page for all stack units.

50 addresses for IPMGR

There are 50 addresses available for IP Manager. IP Manager is configured

through the NNCLI using the ipmgr command. The ipmgr command is in the

config command mode.

Use the following CLI commands for IP Manager list:

BPS2000(config)#ipmgr source-ip ?

<1-50>

Select the address/mask pair.

MAC Addr MAC Address—The MAC address of the device.

Chassis Type Chassis Type—A description of the type of device.

BT Backplane Type—The backplane type of the device.

BayStack devices always return a value of 12.

LS Local Segment—Displays whether the device is on a local

segment or not. Possible values are Yes or No.

CS Current State—Possible values are NEW, HTBT

(heartbeat), and TPCH (topology change).

RSlot/RPort Remote Slot/Remote Port—The remote slot (unit number)

and port used to send out the topology packet.

Table 42 show autotopology nmm-table command output fields (continued)

Field Description

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 86

Žádné komentáře

Avaya BayStack Operating System Switching Software (BoSS 3.1) for BayStack 460, 470 Oznámení Strana 80