Avaya Configuring Ethernet, FDDI, and Token Ring Services Uživatelský manuál stáhnout pdf (Strana 86)

Configuring Ethernet, FDDI, and Token Ring Services

5-10

308623-14.00 Rev 00

Adding a Tagged Circuit to an Existing 100BASE-T Interface

To add an 802.1Q tagged circuit to an existing 100BASE-T interface, complete the

following tasks:

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

click on a 100BASE-T connector.

The Edit Connector window opens.

2. Click on

Edit Circuit

. The Circuit Definition window opens.

3. Choose

Protocols

. The Protocols menu opens.

4. Choose

Add/Delete

. The Select Protocols window opens.

5. Choose

VLAN

, then click on

. The Edit VLAN Interface Parameters

window opens.

6. Click on

Add

. The TAG1Q Parameters window opens.

7. Set the following parameters:

• VLAN Name

• Global VLAN Id

Click on

Help

or see the parameter

descriptions beginning on page A-29.

8. Click on

. The Edit VLAN Interface Parameters

window opens. Note that 802.1Q tagged

circuits are displayed with a V

extension.

9. Select the 802.1Q tagged circuit that you

are adding. Set the

Protocol Type (hex)

parameter. Retain the default value for

connection to Nortel Networks

802.1Q-enabled devices.

10. Click on

Apply

and

Done

. You return to the Configuration Manager

window.

To add IP routing to the 802.1Q tagged circuit:

11.Choose

Circuits

12.Choose

Edit Circuits

. The Circuit List window opens.

13.Select the 802.1Q tagged circuit.

Note that 802.1Q tagged circuits are

displayed with a V

extension.

(continued)

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 155 156

Komentáře k této Příručce

Žádné komentáře

Avaya Configuring Ethernet, FDDI, and Token Ring Services Uživatelský manuál Strana 86

Komentáře k této Příručce

Související produkty a manuály pro Sítě Avaya Configuring Ethernet, FDDI, and Token Ring Services