Avaya Configuring Ethernet, FDDI, and Token Ring Services Uživatelský manuál stáhnout pdf (Strana 96)

Configuring Ethernet, FDDI, and Token Ring Services

A-8

308623-14.00 Rev 00

Parameter: BofL Timeout Divisor

Path: Configuration Manager > XCVR Connector > Edit Line

Default: 1 (10 if router redundancy is enabled)

Options: 1 to 100

Function: The time between BofL transmissions is the value of the BofL Timeout

parameter divided by the value of the BofL Timeout Divisor parameter. When

BofL Timeout Divisor is set to the default value of 1, it has no effect on the

value of BofL Timeout. Setting BofL Timeout Divisor to a value greater than 1

reduces the BofL timeout period.

Instructions: Accept the default or enter a number from 1 to 100.

MIB Object ID: 1.3.6.1.4.1.18.3.4.1.1.60

Parameter: Interface Line Speed

Path: Configuration Manager > XCVR Connector > Edit Line

Default: 100Base-X

Options: Auto Negotiation

100Base-X

100Base-X (Full Duplex)

100Base-X (FD w/flow control)

Function: Specifies the configured line speed and duplex setting for the selected interface,

or enables automatic line negotiation.

Instructions: To enable automatic line negotiation, select Auto Negotiation.

To configure a specific line speed, select one of the following:

•100Base-X

• 100Base-X (Full Duplex)

• 100Base-X (FD w/flow control)

Selecting a specific line speed disables Auto Negotiation.

MIB Object ID: 1.3.6.1.4.1.18.3.4.16.1.1.4

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 155 156

Žádné komentáře

Avaya Configuring Ethernet, FDDI, and Token Ring Services Uživatelský manuál Strana 96