Avaya Configuring Ethernet, FDDI, and Token Ring Services Uživatelský manuál stáhnout pdf (Strana 91)

Site Manager Parameters

308623-14.00 Rev 00

A-3

Parameter: Enable

Path: Configuration Manager > XCVR Connector > Edit Line

Default: Enable

Options: Enable

Disable

Function: Enables or disables this Ethernet line.

Instructions: Select Enable or Disable.

MIB Object ID: 1.3.6.1.4.1.18.3.4.1.1.2

Parameter: BofL Enable

Path: Configuration Manager > XCVR Connector > Edit Line

Default: Enable

Options: Enable

Disable

Function: When set to Enable, the router sends BofL polling messages from this system to

all systems on the local network.

Instructions: Set to Enable or Disable. We recommend that you enable BofL.

MIB Object ID: 1.3.6.1.4.1.18.3.4.1.1.7

Parameter: BofL Timeout

Path: Configuration Manager > XCVR Connector > Edit Line

Default: 5 (4 if router redundancy is enabled)

Options: 1 to 60 seconds

Function: Specifies the time between transmissions of Breath of Life messages from this

Ethernet interface. Timeout will occur if five periods elapse without a successful

BofL message transmission. When timeout occurs, the router disables and

reenables the Ethernet interface.

This parameter is valid only if you set BofL Enable to Enable.

Instructions: Accept the default BofL timeout of 5 seconds, or specify a new value up to 60

seconds.

MIB Object ID: 1.3.6.1.4.1.18.3.4.1.1.8

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 155 156

Žádné komentáře

Avaya Configuring Ethernet, FDDI, and Token Ring Services Uživatelský manuál Strana 91