Avaya Configuring Interface and Router Redundancy Uživatelský manuál stáhnout pdf (Strana 47)

Configuring Interface Redundancy

114079 Rev. B 4-7

Removing Interface Redundancy from a Circuit

To remove interface redundancy from a circuit:

1. In the Conﬁguration Manager window, select any member of the

interface redundancy group you want to remove.

The Edit Connector window opens (r

efer to Figure 4-2).

2. Select Edit Circuit.

The Circuit Deﬁnition window opens (r

efer to Figure 4-3).

3. Deselect all but one member of the interface redundancy group.

4. Choose Lines > Change Lines.

The interface redundancy group no longer exists.

5. Choose File > Exit to exit the window.

Note: You can ﬁnd out whether interface redundancy is conﬁgured on a circuit

by selecting that circuit in the Circuit Deﬁnition window and checking the

Lines menu. If Interface Redundancy is grayed out, it is not conﬁgured on the

circuit you selected.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 91 92

Žádné komentáře

Avaya Configuring Interface and Router Redundancy Uživatelský manuál Strana 47