
BOFL Parameters
114079 Rev. B D-3
Parameter: BOFL Timeout
Default: 5 seconds
Options: 1 to 60 seconds
Function: Specifies the time between transmissions of Breath of Life messages from
this Ethernet interface. Timeout occurs if five periods elapse without a
successful BOFL message transmission. When timeout occurs, the router
disables and reenables this Ethernet interface.
This parameter is valid only if you set BOFL Enable to Enable.
Instructions: Accept the default, or specify a new value up to 60 seconds.
MIB Object ID: 1.3.6.1.4.1.18.3.4.1.1.59
Parameter: BOFL Retries
Default: 5 (4 when the interface is configured for Router Redundancy)
Options: 1 to 5 retries
Function: Specifies the number of BOFL messages this interface can retransmit
before the router declares the circuit down.
Instructions: Either accept the default, or specify a lower value. Use this parameter in
conjunction with the BOFL Timeout Divisor and BOFL Timeout
parameters to decrease the time it takes the router to declare an interface
down.
MIB Object ID: 1.3.6.1.4.1.18.3.4.1.1.59
Komentáře k této Příručce