Avaya Configuring Interface and Router Redundancy Uživatelský manuál Strana 68

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 92
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 67
Configuring Interface and Router Redundancy
5-20 114079 Rev. B
Router Redundancy Member Global Parameters
Use the following descriptions as guidelines when you edit router redundancy
member global parameters.
Parameter: Enable
Default: Enable
Options: Enable
| Disable
Function: This parameter is automatically set to Enable when you choose Router
Redundancy from the Select Protocols window. If you set this parameter
to Disable, you temporarily disable router redundancy on the router
without deleting your configuration file.
Instructions: Choose Disable to disable router redundancy on this router.
MIB Object ID: 1.3.6.1.4.1.18.3.5.17.1.2
Parameter: Member ID
Default: 1
Options: 1 to 128
Function: Specifies the identification number for this member of the router
redundancy group. Each member ID number in a group must be unique.
For example, if there are two routers in a redundancy group, one router
could have a member ID of 1 and the other could have a member ID
of 2. The role-change rules use the member ID to determine a router’s
priority to become the primary router if the Priority parameter for both
routers is set to the same value.
Instructions: Enter a number from 1 to 128 that you have not already assigned to a
member of this redundancy group.
MIB Object ID: 1.3.6.1.4.1.18.3.5.17.1.5
Zobrazit stránku 67
1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 91 92

Komentáře k této Příručce

Žádné komentáře