Avaya Configuring SNMP, BOOTP, DHCP, and RARP Services Uživatelský manuál stáhnout pdf (Strana 40)

Configuring SNMP, BOOTP, DHCP, and RARP Services

1-22

Edit the parameters in this window.

Use the descriptions that follow as a guide.

3. Click on OK.

Parameter: Enable

Default: Enable

Options: Enable

| Disable

Function: Speciﬁes the state of the SNMP agent on all interfaces that support IP.

Instructions: Select Enable to enable the SNMP agent.

Select Disable to disable the SNMP agent.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.5.1.1

Parameter: Use Lock

Default: Enable

Options: Enable

| Disable

Function: Speciﬁes whether the agent responds to multiple network management

stations issuing simultaneous SNMP

SET commands to the router. When

you set this parameter to Enable, the agent identiﬁes the station from

which it receives the next SNMP

SET command and, for a time equal to

the value of the Lock TimeOut parameter, responds only to SNMP

SET

commands from that station. If the agent receives an SNMP SET

command from another network management station during this time, it

issues an SNMP genErr GetResponse PDU, which that station logs as an

SNMP SET ERROR message.

Instructions: Select Enable to prohibit the agent from responding to simultaneous

SNMP

SET commands from multiple network management stations.

Select Disable to allow the agent to respond to simultaneous SNMP SET

commands from multiple network management stations.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.5.1.2

Caution: When you disable the SNMP agent in dynamic mode, you

immediately prohibit Site Manager from communicating with the router.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 107 108

Žádné komentáře

Avaya Configuring SNMP, BOOTP, DHCP, and RARP Services Uživatelský manuál Strana 40