Avaya Configuring SNMP, BOOTP, DHCP, and RARP Services Uživatelský manuál stáhnout pdf (Strana 82)

Configuring SNMP, BOOTP, DHCP, and RARP Services

2-20

Parameter: Relay Agent IP Address

Default: None

Options: Any valid IP address

Function: Speciﬁes the IP interface that receives BOOTREQUEST packets from

clients.

Instructions: Enter the IP address of a numbered network interface that you want to

receive BOOTREQUEST or DHCP packets from clients, then conﬁgure

this IP address on the router, if you have not already done so.

Do not specify an unnumbered interface for this parameter.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.8.3.3.1.3

Parameter: Target Server IP Address

Default: None

Options: Any valid IP address

Function: Speciﬁes the address of a server that should receive BOOTREQUEST or

DHCP packets.

Instructions: Enter the IP address of the server that should receive the

BOOTREQUEST or DHCP packet.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.8.3.3.1.4

Parameter: Enable/Disable

Default: Enable

Options: Enable

| Disable

Function: Speciﬁes whether the forwarding route is active.

Instructions: Select Enable to allow BOOTP or DHCP forwarding through this route.

Select Disable to prevent BOOTP or DHCP forwarding through this

route.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.8.3.3.1.2

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 107 108

Žádné komentáře

Avaya Configuring SNMP, BOOTP, DHCP, and RARP Services Uživatelský manuál Strana 82