Avaya Configuring Dial Services Uživatelský manuál Strana 217

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 482
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 216
Customizing Line Pools
117353-B Rev. 00
9-45
Setting the TEI Parameters for X.25 Service over the D Channel
If you enable X.25 service over the D channel, you must configure the TEI value
and type to communicate with the ISDN switch.
The x25-tei-type parameter
specifies how you choose to configure the TEI value
for the DTE. You can preassign the identifier value at the time you order ISDN
service or the router can learn the value from the switch dynamically when you
place a call and the line becomes active. Either way, the switch assigns this value.
To specify the type enter:
x25-tei-type
<
type
>
type can be:
fixed -
Tells the router that you will enter the identifier assigned by the switch
before placing any calls.
auto -T
ells the router that it will learn the identifier dynamically once the line is
active.
The x25-tei-value parameter
assigns a number to the X.25 DTE to identify it to the
ISDN switch. This parameter is available only if you enable X.25 over the D
channel for a fixed TEI type.
To configure the value enter:
x25-tei-value
<
integer
>
integer can be a value from
0 to 63.
Enter the TEI value that the switch provider assigned when you ordered ISDN
service. If the TEI type is set to auto, ignore this parameter.
For example:
bri/1/1# x25-tei-type fixed x25-tei-value 7
To disable X.25 over the D channel, go to “Modifying the X.25 Circuit for Service
over the D Channel” on page 9-52.
Zobrazit stránku 216
1 2 ... 212 213 214 215 216 217 218 219 220 221 222 ... 481 482

Komentáře k této Příručce

Žádné komentáře