
Configuring BGP Accept and Announce Policies
308628-15.0 Rev 00
5-25
For example, the following command sequence configures the router to advertise
network 192.10.20.0/255.255.255.0 and sets the MED to 100:
announce/pol_1//jointfilesconvert/97454/bgp#
action announce
announce/pol_1//jointfilesconvert/97454/bgp#
modify
modify//jointfilesconvert/97454/bgp/announce/pol_1#
advertise 192.10.20.0/24
advertise/192.10.20.0/255.255.255.0//jointfilesconvert/97454/bgp/announce/pol_1#
back
modify//jointfilesconvert/97454/bgp/announce/pol_1#
med-method specified
modify//jointfilesconvert/97454/bgp/announce/pol_1#
med 100
modify//jointfilesconvert/97454/bgp/announce/pol_1#
Using Site Manager
To supply override values for routes that match a BGP announce policy, complete the
following steps:
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose
Protocols
.
The Protocols menu opens.
2. Choose
IP
. The IP menu opens.
3. Choose
Policy Filters
. The Policy Filters menu opens.
4. Choose
BGP-4
. The BGP-4 Policies menu opens.
5. Choose
Announce Policies
. The BGP4 Announce Policy Filters
window opens.
6. Click on the policy that you want to edit. The parameter values for that policy
appear in the window.
(continued)
Komentáře k této Příručce