Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Uživatelský manuál stáhnout pdf (Strana 90)

Configuring IP Exterior Gateway Protocols (BGP and EGP)

4-8

308628-15.0 Rev 00

Keeping the Connection Alive

After a session is established, BGP peers periodically issue keepalive messages to

maintain the connection. By default, BGP issues a keepalive message every 30

seconds.

You can use the BCC or Site Manager to specify how often BGP issues a

keepalive message on this peer-to-peer session or to disable the keepalive function

by setting the value to 0.

Using the BCC

To set the keepalive interval, go to a BGP peer prompt (for example,

box; ip; /jointfilesconvert/97454/bgp;

peer/2.2.2.2/2.2.2.3

) and enter:

keepalive

seconds>

seconds

specifies how often BGP sends a keepalive message (from 1 through

2,147,483,647) on this peer session. Setting this value to 0 disables the sending of

keepalive messages.

For example, the following command causes BGP to send a keepalive message

every 10 seconds on interface 2.2.2.2 to the peer at 2.2.2.5:

peer/2.2.2.2/2.2.2.5/5#

keepalive 10

peer/2.2.2.2/2.2.2.5/5#

Using Site Manager

To set the keepalive interval, complete the following steps:

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

choose

Protocols

The Protocols menu opens.

2. Choose

. The IP menu opens.

3. Choose

BGP

. The BGP menu opens.

4. Choose

Peers

. The IP Interface List for BGP window

opens.

(continued)

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 275 276

Komentáře k této Příručce

Žádné komentáře

Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Uživatelský manuál Strana 90

Komentáře k této Příručce

Související produkty a manuály pro Software Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP)