
Configuring IP Exterior Gateway Protocols (BGP and EGP)
A-12
308628-15.0 Rev 00
Parameter: Peer AS
Path: Configuration Manager > Protocols > IP > BGP > Peers > BGP Peers
Default: None
Options: 1 to 65535
Function: Identifies the autonomous system to which the BGP router at the remote end of
this BGP peer connection belongs.
Instructions: Enter the appropriate AS number.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.10
Parameter: Local Address
Path: Configuration Manager > Protocols > IP > BGP > Peers > BGP Peers > Add
Default: None
Options: Any IP address
Function: Specifies the IP address of the interface on the local side of this BGP peer
connection.
Instructions: Enter the appropriate address.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.4
Parameter: Peer Mode
Path: Configuration Manager > Protocols > IP > BGP > Peers > BGP Peers
Default: None
Options: None
|
Reflector Internal
|
Reflector External
Function: Indicates the route reflector mode of the remote BGP peer.
Instructions: If the peer is a node, use the default, None.
If the peer is a route reflector in the same cluster, specify Reflector Internal.
If the peer is a route reflector in a different cluster, specify Reflector External.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.35
Komentáře k této Příručce