Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Uživatelský manuál Strana 173

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 276
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 172
Customizing EGP Services
308628-15.0 Rev 00
8-13
Setting Neighbor Timers
EGP uses two configurable timers: the Hello timer and the poll timer.
The Hello timer determines the number of seconds between the local EGP
neighbors EGP Hello message retransmissions. This variable represents the RFC
904 T1 timer. By default, EGP sends a Hello message every 60 seconds. You can
supply a value from 30 through 120 seconds.
The poll timer determines the interval between the local EGP neighbors EGP poll
message retransmissions. This variable represents the RFC 904 T2 timer. By
default, EGP retransmits a poll message every 180 seconds. You can specify a
value from 120 through 480 seconds.
To set the local EGP neighbors Hello or poll timer, complete the following steps:
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose
Protocols
.
The Protocols menu opens.
2. Choose
IP
. The IP menu opens.
3. Choose
EGP
. The EGP menu opens.
4. Choose
Neighbors
. The IP Interface List for EGP window
opens.
5. Click on the IP interface that you want to
edit.
The parameter values for that interface
appear in the window.
6. Click on
EGP Neighbor
. The EGP Neighbors List window opens.
7. Click on the address of the EGP neighbor
that you want to edit.
The parameter values for that neighbor
appear in the window.
8. Set the following parameters:
Hello Timer
Poll Timer
Click on
Help
or see the parameter
descriptions beginning on page A-28.
9. Click on
Apply
, and then click on
Done
. You return to the IP Interface List for EGP
window.
10. Click on
Done
. You return to the Configuration Manager
window.
Zobrazit stránku 172
1 2 ... 168 169 170 171 172 173 174 175 176 177 178 ... 275 276

Komentáře k této Příručce

Žádné komentáře