Avaya Business Communications Manager 50 Instalační manuál stáhnout pdf (Strana 116)

116 Chapter 10 Installing telephones and peripherals

NN40170-305

Analog terminal adapter 2

The analog terminal adapter 2 (ATA2) connects a standard analog voice device or data

communication device to a digital station connector on the Avaya BCM50 system.

For the requirements and procedure to install the device, see Installing the analog terminal adapter

on page 117.

Installing an emergency telephone

You can use the emergency telephone to make calls when no power is available to the Avaya

BCM50 system.

Emergency telephone will work if it is connected to CSC 1.0 hardware, however it will not work

with later hardware versions.

Emergency telephone will work only if it is connected to expansion unit with a caller ID trunk

module (CTM) or a global analog trunk module (GATM) on the CSC 1.0 (Indicated by telegraph

pole label) and providing first line and first analog set.

To install an emergency telephone on the BCM50 system, connect a single-line analog telephone

to the auxiliary port on the CTM/GATM. When you make a call from the emergency telephone,

the auxiliary port uses the telephone line connected to the line 1 port of the CTM or GATM.

You can connect an emergency telephone to every CTM installed on your BCM50 system.

To install the emergency telephone

1 Connect a single-line analog telephone to the auxiliary port on the CTM or GATM.

2 Connect an analog PSTN line cable to the line 1 port of the CTM or GATM.

3 On the main unit (if CSC 1.0):

— Connect a single-line analog telephone to the first analog station port on the main unit

(pins 30 + 5 / i.e. White-Slate & Slate-White)

— Connect an analog PSTN line cable to the first line port on the main unit (pins 26 + 1 /

i.e. white-blue & blue-white).

Installing IP Deskphones

You can set the system to automatically assign DNs to the IP Deskphones. The autoassign feature

assigns DNs in the configured IP DN range.

If you choose to manually assign DNs, choose DNs in the assigned DN range. Ensure that the DN

type in each DN record is set to IP telephony.

For details about configuring DN records for the IP Deskphones, see the Avaya Business

Communications Manager 6.0 Configuration—Telephony.

1 2 ... 111 112 113 114 115 116 117 118 119 120 121 ... 300 301

Žádné komentáře

Avaya Business Communications Manager 50 Instalační manuál Strana 116