Avaya Business Communications Manager 50 Instalační manuál stáhnout pdf (Strana 67)

Chapter 4 Determining DHCP server configuration and IP address 67

Installation and Maintenance Guide

By default, the integrated router is selected and you configure the BCM50a, BCM50ba, BCM50e,

and BCM50be main units with a dynamic IP address, meaning that these units request an IP

configuration from a DHCP server. Because the integrated router has a DHCP server, this DHCP

server responds to the request.

By default, the router LAN IP address is 192.168.1.1, and the IP address assigned to the Avaya

BCM50 system is the first IP address in the DHCP pool. If the DHCP pool starts at 192.168.1.190,

then the BCM50 is 192.168.1.190 even though the router is 192.168.1.1. Therefore, the Avaya

BCM50 system receives the IP address 192.168.1.2 (subnet mask is 255.255.255.0) from the

DHCP server on the integrated router.

The DHCP server on the integrated router supplies the information (primary and secondary TPS

server information, VLAN IDs) to the IP Deskphones enabling the phones to connect to the

BCM50. If the IP address of the integrated router changes, then the IP address reserved for the

BCM50 automatically changes. The DHCP server on the integrated router automatically updates

the S1 and S2 IP address.

For more information about configuring a DHCP server for your Avaya BCM50 main unit, see the

procedure To configure DHCP server settings on page 139.

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 300 301

Žádné komentáře

Avaya Business Communications Manager 50 Instalační manuál Strana 67