
Creating Line Pools
114062 Rev. A 7-35
Figure 7-19. MCT1 Timeslots Window
Configure B channels as follows:
1. Click on Select All to automatically change all the timeslots to B channels.
Click on individual timeslots only if you have purchased selective PRI
service from your provider.
If you click on an individual timeslot, a pull-down menu appears with two
options (Figure
7-20).
Note: Select only the timeslots that the service provider assigns to you. For
example, if your provider gives you timeslots 1 through 10, select slots
1 through 10 in the Timeslots window.
Komentáře k této Příručce