Avaya Configuring Dial Services Uživatelský manuál Strana 244

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 326
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 243
Configuring Dial Services
10-10
114062 Rev. A
Parameter: PAP Local ID
Default: None
Options: Any text string; maximum 25 characters
Function: Specifies the PAP ID that you assign to this interface. This parameter is
only configurable if the bandwidth mode is Monitor.
This parameter identifies the calling router to the called router. During the
interface’s authentication phase, all Password Authenticate-Request
messages that the calling router sends to the called router must include the
correct PAP ID or the called router sends an Authenticate Negative
Acknowledgment (Authenticate-NAK) and does not bring up the
connection.
Instructions: If you are using PAP as the authentication protocol, specify a unique PAP
ID for this circuit. If not, ignore this parameter.
MIB Object ID: 1.3.6.1.4.1.18.3.5.1.4.5.1.37
Parameter: PAP Password
Default: Unsecured
Options: Any text string; maximum 25 characters
Function: Specifies the PAP password that you assign to this interface. This
parameter is only configurable if the bandwidth mode is Monitor.
During the interface’s authentication phase, all Password
Authenticate-Request messages that the calling router sends to the called
router must include the correct PAP password or the called router sends
an Authenticate Negative Acknowledgment (Authenticate-NAK) and does
not bring up the connection.
Instructions: If you are using PAP as the authentication protocol, specify a unique PAP
password for this circuit. If not, ignore this parameter.
MIB Object ID: 1.3.6.1.4.1.18.3.5.1.4.5.1.38
Zobrazit stránku 243
1 2 ... 239 240 241 242 243 244 245 246 247 248 249 ... 325 326

Komentáře k této Příručce

Žádné komentáře