Avaya Configuring Dial Services Uživatelský manuál Strana 249

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 326
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 248
Configuring Bandwidth-on-Demand Circuits
114062 Rev. A
10-15
Parameter: BOD Full Threshold
Default: 70 percent
Range: 10 to 400 percent
Function: Specifies a percentage of the maximum amount of data that the router
transmits and receives. This is the percentage the data traffic must reach
or exceed before the router considers the line or bundle congested.
Instructions: Enter a percentage threshold that the router uses as a measure of
congestion. If you configured data compression on the circuit, you may
want to configure a threshold greater than 100 percent.
MIB Object ID: 1.3.6.1.4.1.18.3.5.9.2.2.1.53
Parameter: BOD Periods to Fail
Default: 10
Range: 1 to 100
Function: Specifies the number of consecutive times the router finds that data traffic
on the bandwidth circuit is above the configured congestion threshold,
thereby concluding that the line or bundle is congested.
Instructions: Enter the number of consecutive times the circuit can exceed the
threshold before the router brings up a secondary line.
MIB Object ID: 1.3.6.1.4.1.18.3.5.9.2.2.1.54
Zobrazit stránku 248
1 2 ... 244 245 246 247 248 249 250 251 252 253 254 ... 325 326

Komentáře k této Příručce

Žádné komentáře