
show sync
117380-A Rev. A 2-631
modem_config
Displays configuration information about a V.34 Modem adapter module installed in a
BayStack ARN router:
Sample Display - show sync modem_config
Configuration of V34 modem in Slot 1 Connector 1:
HW Revision 3
Software Revision V1.440-V34_DS
Factory Defaults: disabled
Initialization String: AT&M1&Q1&D0&S1&R0S0=2
Factory Default String: AT&M2&Q2&D0&S1&R0S0=0M1L2T
Country Code: North America
Configuration Hardware revision of the V.34 modem module, listed by slot and
COM connector number. For the ARN, all modules are Slot 1.
Modems that do not display this information will display N/A (not
applicable).
Software Revision Firmware revision of the modem module.
Factory Defaults Indicates whether exclusive use of the factory default initialization
string is enabled or disabled. When enabled, only the default string
is sent to the modem at restart. When disabled, the router sends a
user-specified initialization string after the default string.
Initialization String AT command string currently sent to the modem after the factory
default string. Commands in this string take precedence over
commands in the factory default string.
Factory Default
String
AT command string sent to the modem at every restart:
AT&M2&Q2&D0&S1&R0S0=0M1L2T.
Country Code Modem country code.
Komentáře k této Příručce