Avaya Using Technician Interface Scripts Uživatelský manuál Strana 754

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 849
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 753
show xb
117380-A Rev. A 2-707
configuration
Displays how a Translation Bridge has been configured globally. The table includes the
following information:
Sample Display - show xb configuration
Translation Bridge (XB) Base Record Configuration
-------------------------------------------------
Transparent
Bridge Default Broadcast Aging
Mode Ring ID Mode Conversion Time
------- ----------- ------- ---------- -----
Enabled 0xFFE Ethernet Enabled 300
disabled
Displays the Source Routing and Transparent Bridge circuits that are disabled. Mode is
always Disabled and State is always Down. Use this display to identify the Source Route
or Transparent Bridge circuits that are not enabled. The Source Routing Circuits table
includes all circuits that have translation enabled on the corresponding Transparent Bridge
circuit. The Transparent Bridge Circuits table shows only the circuits that have Translation
disabled.
Mode Status of the XB: Enabled or Disabled.
Transparent Bridge Ring ID Ring number for the entire translation bridge network; ranges from
0x001 to 0xFFF.
Default Mode Default type of frame to be sent to the transparently bridged
network: Ethernet or 802.3.
Broadcast Conversion Status of broadcast conversion: Enabled or Disabled. When
enabled, the translation bridge converts broadcast addresses
between 802.3 and 802.5.
Aging Time Number of seconds an address entry remains in the translation
bridge’s forwarding or RIF table when no data from that address
has been received -- between 2 and 600 seconds.
Zobrazit stránku 753
1 2 ... 749 750 751 752 753 754 755 756 757 758 759 ... 848 849

Komentáře k této Příručce

Žádné komentáře