Avaya Business Policy Switch 2000 Command Line Interface Release 2.0 Uživatelský manuál Strana 81

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 233
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 80
Chapter 2 General CLI commands 79
Reference for the Business Policy Switch 2000 Command Line Interface
Setting TFTP parameters
You can display the IP address of the TFTP server, assign an IP address you want
to use for a TFTP server, copy a configuration file to the TFTP server, or copy a
configuration file from the TFTP server to the switch to use to configure the
switch. This section covers:
show tftp-server command, next
tftp-server command on page 80
no tftp-server command on page 80
copy config tftp command on page 80
copy tftp config command on page 81
show tftp-server command
The show tftp-server command displays the IP address of the server used for
all TFTP-related transfers. The syntax for the
show tftp-server command is:
show tftp-server
The show tftp-server command is in the privExec command mode.
The
show tftp-server command has no parameters or variables.
Figure 17 displays a sample output of the
show tftp-server command.
Figure 17 show tftp-server command output
BPS2000#show tftp-server
TFTP Server IP address : 192.168.100.15
BPS2000#
Zobrazit stránku 80
1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 232 233

Komentáře k této Příručce

Žádné komentáře