Avaya Configuring BOOTP Services Uživatelský manuál stáhnout pdf (Strana 103)

Customizing BootP

308644-15.1 Rev 00

4-3

Using Site Manager

To disable or reenable BootP, complete the following tasks:

Enabling ARP Cache Support

Some boot PROM devices do not support the Address Resolution Protocol (ARP).

Without ARP support, the client PC or workstation cannot use the BootP relay

agent (that is, the BayRS router configured as a BootP relay agent) to download a

file over the network.

To accommodate devices that do not run ARP, you can configure the router to

create an ARP cache entry based on the information received in the BootP reply

from the server. By default, this feature is disabled.

You can use the BCC or Site Manager to enable ARP cache support.

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

choose

Protocols

The Protocols menu opens.

2. Choose

. The IP menu opens.

3. Choose

BOOTP

. The BOOTP menu opens.

4. Choose

Relay Agent Interface Table

. The BOOTP Relay Agent Interface Table

window opens. This window lists all the IP

interfaces that you configured for BootP

services on the router.

5. Set the

Enable/Disable

parameter.

Click on

Help

or see the parameter

description on page A-16.

6. Click on

Apply

7. Click on

Done

. You return to the Configuration Manager

window.

Note:

Enabling or disabling the ARP cache feature has no effect on the

operation of DHCP.

1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 195 196

Komentáře k této Příručce

Žádné komentáře

Avaya Configuring BOOTP Services Uživatelský manuál Strana 103

Komentáře k této Příručce

Související produkty a manuály pro Software Avaya Configuring BOOTP Services