Avaya Configuring BOOTP Services Uživatelský manuál stáhnout pdf (Strana 109)

Customizing BootP

308644-15.1 Rev 00

4-9

Specifying the Pass Through Mode for Packet Forwarding

BootP and DHCP use the BootP relay agent to forward packets. You can configure

the BootP relay agent to forward BootP packets, DHCP packets, or both. The

default setting is BootP, which allows the interface to transmit only BootP packets.

Change the setting if you want to transmit DHCP packets.

You can use the BCC or Site Manager to specify the pass through mode.

Using the BCC

To set the pass through mode on a BootP interface, go to the BootP prompt (for

example,

box; eth 2/2; ip/2.2.2.2/255.255.0.0; bootp

) and enter:

pass-thru-mode

<value>

value

is one of the following:

bootp

(default)

bootp-dhcp

dhcp

For example, this command line sets the pass through mode to bootp-dhcp, which

enables the BootP relay agent on the router to transmit both BootP and DHCP

packets to the server.

bootp/2.2.2.2#

pass-thru-mode bootp-dhcp

bootp/2.2.2.2#

Using Site Manager

To set the pass through mode on a BootP interface, complete the following tasks:

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

choose

Protocols

The Protocols menu opens.

2. Choose

. The IP menu opens.

3. Choose

BOOTP

. The BOOTP menu opens.

(continued)

1 2 ... 104 105 106 107 108 109 110 111 112 113 114 ... 195 196

Žádné komentáře

Avaya Configuring BOOTP Services Uživatelský manuál Strana 109