Avaya Configuring BOOTP Services Uživatelský manuál stáhnout pdf (Strana 175)

Site Manager Parameter Descriptions

308644-15.1 Rev 00

A-23

Parameter: Target Server IP Address

Path: Configuration Manager > Protocols > IP > BOOTP > Relay Agent Interface

Table > Pref Serv > Add

Default: None

Options: Any valid IP address

Function: Specifies the address of a server that should receive BOOTREQUEST or DHCP

packets.

Instructions: Enter the IP address of the server that should receive the BOOTREQUEST or

DHCP packets.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.8.3.3.1.4

Parameter: Enable/Disable

Path: Configuration Manager > Protocols > IP > BOOTP > Relay Agent Interface

Table > Pref Serv

Default: Enable

Options: Enable

Disable

Function: Specifies whether the forwarding route is active.

Instructions: Select Enable to allow BootP or DHCP forwarding through this route. Select

Disable to prevent BootP or DHCP forwarding through this route.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.8.3.3.1.2

Parameter: Target Name

Path: Configuration Manager > Protocols > IP > BOOTP > Relay Agent Interface

Table > Pref Serv

Default: None

Options: Any string of printable ASCII characters, up to 63 characters in length,

including embedded spaces

Function: Specifies the target server’s host name.

Instructions: If you want to keep track of the names of BootP or DHCP servers, enter the

target server’s host name.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.8.3.3.1.5

1 2 ... 170 171 172 173 174 175 176 177 178 179 180 ... 195 196

Žádné komentáře

Avaya Configuring BOOTP Services Uživatelský manuál Strana 175