Avaya Configuring BOOTP Services Uživatelský manuál stáhnout pdf (Strana 139)

Customizing the DHCP Server

308644-15.1 Rev 00

6-3

Specifying the DHCP Server IP Address

To ensure that the DHCP server on the router can communicate with the NetID

Server Manager, you must specify a local IP address that the DHCP server can use

to identify itself to the NetID Server Manager. This address must correspond to

the address of an actual local IP interface configured on the router. This address

cannot be a circuitless IP address.

You can use the BCC or Site Manager to specify a local IP address for the DHCP

server.

Using the BCC

To specify a local IP address for the DHCP server, go to the global DHCP prompt

(for example,

box; ip; dhcp

) and enter:

loc-ipaddr

<ip_address>

ip_address

specifies the IP address that the DHCP server uses to identify itself to

the NetID Server Manager serving this DHCP server.

For example, the following command specifies the IP address 20.20.20 for the

DHCP server:

dhcp#

loc-ipaddr 20.20.20.20

dhcp#

4. Choose

Global.

The DHCP Global Parameters window

opens.

5. Set the

Server Manager IP Address

parameter. Click on Help or see the

parameter description on page A-24.

6. Click on

. You return to the Configuration Manager

window.

Site Manager Procedure

(continued)

You do this System responds

1 2 ... 134 135 136 137 138 139 140 141 142 143 144 ... 195 196

Žádné komentáře

Avaya Configuring BOOTP Services Uživatelský manuál Strana 139