Avaya Configuring BOOTP Services Uživatelský manuál Strana 133

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 196
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 132
Customizing BootP/DHCP Relay
308644-15.1 Rev 00
5-3
Using Site Manager
To allow the BootP relay agent to forward DHCP packets, complete the following
tasks:
Defining DHCP Servers
If DHCP clients obtain IP addresses and other configuration information from a
DHCP server on a different subnet, connected through a router, then you must
define a DHCP preferred server by specifying the IP address of the BootP relay
agent on the local router and the IP address of the target server. The router can
then unicast a DHCP packet through normal IP services to that server. For
instructions, see Specifying Servers for BootP Services
on page 4-21.
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose
Protocols
.
The Protocols menu opens.
2. Choose
IP
. The IP menu opens.
3. Choose
BOOTP
. The BOOTP menu opens.
4. Choose
Relay Agent Interface Table
. The BOOTP Relay Agent Interface Table
window opens. This window lists all the IP
interfaces that you configured for BootP
services on the router.
5. Click on
Forward I/F
. The BOOTP Relay Agent Forwarding
Table window opens.
6. Select the address pair that you want to
configure.
7. Set the
Pass Through Mode
parameter.
Click on
Help
or see the parameter
description on page A-21.
8. Click on
Apply
.
9. Click on
Done
. You return to the Configuration Manager
window.
Zobrazit stránku 132
1 2 ... 128 129 130 131 132 133 134 135 136 137 138 ... 195 196

Komentáře k této Příručce

Žádné komentáře

RED Proyectores De Diapositivas manuales de usuario

Empezando en 0-9

Haga clic en el alfabeto a continuación para desplazarse a la lista completa de modelos que comienzan con esa letra

Modelos Tipo de documento
10303
Ficha de datos   Reflecta 2500 AF + Agomar 2.8/90, 24 paginas