Avaya Configuring BOOTP Services Uživatelský manuál stáhnout pdf (Strana 86)

Configuring SNMP, BootP, and DHCP Services

3-26

308644-15.1 Rev 00

For example, the following command causes the SNMP agent to send to a network

management station a trap for the IP protocol on slot 2:

snmp#

trap-entity entity ip slot 2

trap-entity/ip/2#

By default, the attribute for all severity levels is set to

off

. To turn on logging for

any severity level, navigate to the trap entity-specific prompt (for example,

box;

snmp; trap-entity/ip/2

) and enter one or more of the following commands:

fault-log on

warning-log on

information-log on

trace-log on

debug-log on

For example, to send warning and fault traps to the network management station,

enter the following commands:

trap-entity/ip/2#

warning-log on; fault-log on

Using Site Manager

To specify a trap entity, complete the following tasks:

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

choose

Protocols

The Protocols menu opens.

2. Choose

. The IP menu opens.

3. Choose

SNMP

. The SNMP menu opens.

4. Choose

Trap Configuration

. The Trap Configuration menu opens.

5. Choose

Interfaces

. The Trap Configuration window opens.

6. Select the slot for which you want to

configure traps by clicking on the bar in the

Slot box.

7. Select an entity for which you want to

configure traps. If you want to configure

traps for all entities running on the slot,

choose

All Entities

from the top of the

column.

The entity names appear in the Available

Entities column, a comprehensive list of

all protocols available, regardless of the

platform or software that you are using.

(continued)

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 195 196

Komentáře k této Příručce

Žádné komentáře

Avaya Configuring BOOTP Services Uživatelský manuál Strana 86

Komentáře k této Příručce

Související produkty a manuály pro Software Avaya Configuring BOOTP Services