Avaya Configuring BOOTP Services Uživatelský manuál stáhnout pdf (Strana 140)

Configuring SNMP, BootP, and DHCP Services

6-4

308644-15.1 Rev 00

Using Site Manager

To specify a local IP address for the DHCP server, complete the following tasks:

Specifying the DHCP Server TCP Port Number

To allow the DHCP server to communicate with the NetID Server Manager using

TCP, you must specify a remote TCP port number on the DHCP server. This

number must match the port number that you specify on the NetID Server

Manager.

You specify the TCP port number on the NetID Server Manager when you install

the NetID Server Manager software. The default TCP port number is 24736. For

information about specifying a remote port number for the NetID Server Manager,

see the NetID System Administrator’s Guide.

You can use the BCC or Site Manager to specify the TCP port number on the

DHCP server.

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

choose

Protocols.

The Protocols menu opens.

2. Choose

Global Protocols

. The Global Protocols menu opens.

3. Choose

DHCP

. The DHCP menu opens.

4. Choose

Global.

The DHCP Global Parameters window

opens.

5. Set the

Local IP Address

parameter.

Click on

Help

or see the parameter

description on page A-28

6. Click on

. You return to the Configuration Manager

window.

1 2 ... 135 136 137 138 139 140 141 142 143 144 145 ... 195 196

Žádné komentáře

Avaya Configuring BOOTP Services Uživatelský manuál Strana 140