Avaya BCM 4.0 Networking Průvodce konfigurací Strana 349

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 758
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 348
Chapter 33 Private networking: MCDN over PRI and VoIP 349
BCM 4.0 Networking Configuration Guide
Figure 118 M1 to BCM network diagram
To set up the M1 in a BCM network
1 Make sure the M1 IPT meets the following requirement:
IPT version 3.0 or newer
2 Ensure that the M1 ESN programming (CDP/UDP) is compatible. For information about this,
refer to your M1 documentation.
3 On the BCM Element Manager:
Set up outgoing call configuration for the VoIP gateway.
Set up a remote gateway for the Meridian 1.
Ensure the dialing rules (CDP or UDP) are compatible with the M1.
Configure the PSTN fallback, and enable QoS on both systems.
If target lines have not already been set up, configure the telephones to receive incoming
calls through target lines.
MCDN functionality on fallback PRI lines
To enable MCDN functionality over PRI fallback lines
Check MCDN PRI settings on the M1. For information on this, refer to the M1 documentation.
Ensure SL-1 (MCDN) keycodes are entered on the BCM and the PRI line is set up for SL-1
protocol.
For a detailed description of setting up fallback, refer to “Setting up VoIP trunks for fallback” on
page 429.
WarehouseHead Office
Meridian
M1 + IPT
PSTN
(fallback
route)
Intranet
VoIP trunk
BCM
System
telephone
2004
IP telephone
Company
server
telephone
Router
Router
Zobrazit stránku 348
1 2 ... 344 345 346 347 348 349 350 351 352 353 354 ... 757 758

Komentáře k této Příručce

Žádné komentáře