Avaya BCM 4.0 Networking Průvodce konfigurací Strana 575

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 758
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 574
Chapter 64 Configuring IP Routing 575
BCM 4.0 Networking Configuration Guide
To modify the static route configuration
1 Click the static route you want to modify in the Static Routes table.
2 Click Modify.
The Static Route dialog box appears.
3 Modify the static route attributes.
4 Click Save.
To delete a static route
1 Click the static route you want to delete in the Static Route table.
2 Click Delete.
A confirmation message appears.
3 Click Yes .
Routing Information Protocol (RIP)
BCM supports RIP, a widely-used protocol for managing routing information in a self-contained
network, such as a corporate intranet. RIP measures the shortest path between two points on a
network in terms of the number of hops between those points.
BCM router sends RIP routing information updates that list all the other hosts it knows about, to its
nearest neighbor host every 30 seconds. The neighbor host sends the information to its next
neighbor, until all the hosts in the network know the routing paths, a state known as network
convergence. RIP uses a hop count to determine network distance. Each router in the network uses
the routing table information to determine the next host for the packet, until it reaches the
destination.
BCM does not support on demand routing table update. It supports periodic routing table update.
For information on how to select RIP as your routing protocol, see “Configuring RIP parameters
on a network interface” on page 579.
Note: Destination Address in static routes cannot be modified.
However, the other fields: Destination Mask, Metric Value, and Auto
Dial-out can be modified.
Note: IP subnet aggregation is not supported.
Zobrazit stránku 574
1 2 ... 570 571 572 573 574 575 576 577 578 579 580 ... 757 758

Komentáře k této Příručce

Žádné komentáře