
Chapter 62 Configuring the Dial-up resources 543
BCM 4.0 Networking Configuration Guide
Dial-out
Modem Dial-out
Refer to the following topics:
• ““Configuring a modem interface” on page 544”
• “Enabling and disabling the modem interface” on page 543
• “Configuring a modem interface” on page 544
Creating a modem interface
To create a modem interface
1 Click Configuration > Network Interfaces > Interfaces tab.
2 Click Add.
The Add Interface dialog box appears.
3 Select Modem from the Interface type drop-down list.
4 Enter a logical name in the Interface name field.
5 Click OK.
The modem appears in the list of Network Interfaces.
Enabling and disabling the modem interface
If you want to the use the modem as a backup WAN connection or as interface to send SNMP
traps to the SNMP Manager, you must enable the modem interface.
If you are not using the modem interface for WAN backup or SNMP traps, Nortel recommends
that you disable the modem to help prevent unauthorized access to the BCM.
Note: Modem interfaces are not listed as default interfaces, the administrator
must add them.
Komentáře k této Příručce