Avaya BCM 4.0 Networking Průvodce konfigurací stáhnout pdf (Strana 487)

Chapter 58 Prerequisites checklist 487

BCM 4.0 Networking Configuration Guide

Figure 147 Selecting the Published IP address

The flowchart shown above makes reference to public and private IP addresses. The public and

private IP addresses are concepts relating to Network Address Translation (NAT). The decision

also depends on whether a Virtual Private Network (VPN) is enabled. For information about NAT

and VPN, refer to “Configuring NAT (Network Address Translation)” on page 613.

If you use IP telephones on the network, they must be set to have the IP address of the network

card they are connected to for their Default Gateway, and the Published IP address as the S1 IP

Žádné komentáře

Avaya BCM 4.0 Networking Průvodce konfigurací Strana 487