
124 Set access to call answer features configuration
Nortel Business Communication Manager 5.0
Configuration — Devices
NN40170-500 02.04 Standard
August 2009
Copyright © 2009 Nortel Networks
Programming call redirection on a line
To program call redirection on a line use the following procedure.
Procedure steps
Step Action
1 In Element Manager, click Configuration > Telephony > Lines > Active
Physical Lines.
2 Select the line you want to redirect (ensure that the line is not in a line pool).
3 Click the Preferences tab.
4 In the Redirect to list, enter the number that you want to redirect the calls to.
5 Enter a remote number. Ensure that the routing codes are included.
6 To turn off redirect, delete the remote number from the field.
--End--
Adjusting the call redirect tone
You can cause a short ring to occur when a line is redirected using FEATURE
84. This is set for each telephone.
Procedure steps
Step Action
7 In Element Manager, click Configuration > Telephony > Sets > Active
Sets.
8 Select the DN record for the telephone for which you want to modify the
redirect tone.
9 Click the Capabilities and Preferences tab.
10 Click the Capabilities tab.
11 Select the Redirect ring check box.
--End--
Configuring call forward
You can set up a telephone to send calls to another telephone automatically,
or to a voice mailbox if the telephone is not answered, or if it rings busy. This
feature can be programmed from the system for each telephone, as well as at
the telephone.
Komentáře k této Příručce