Avaya Business Communication Manager 5.0 - Configuration - Devices Uživatelský manuál stáhnout pdf (Strana 246)

246 DN records panes

Nortel Business Communication Manager 5.0

Configuration — Devices

NN40170-500 02.04 Standard

August 2009

ATA Settings tab

Analog telephones have some settings that are specific to the analog

connection. An analog telephone can be connected to the system directly

through an analog station port, either on the Main Unit (in countries that

support Main Unit Analog Stations) or through Analog Station Media Bay

Modules. These settings apply only when the DN record Model field is set to

Other.

Analog telephones can also be connected by using an Analog Terminal

Adapter (ATA2). The digital station port can be on the main unit, or on a Digital

Station Media Bay Module.

Figure 12 ATA Setting pane fields

Table 16

Attribute Values Description

ATA answer timer 3, 5, 7, 10 Select the length of delay between the time you dial

the last digit and when the analog device is ready to

receive DTMF tone.

ATA tones <check box> Not selected: No tones occur when a message is

received (use for data equipment).

Selected: Tones occur when a message is received

(use for analog telephones).

ATA use On site

Off site

Select the location of the ATA2.

Note: Set the field to On site for all installations,

except devices on a long loop. Set the field to Off site

to increase the audio level to devices that are remote

to the ATA2. This field has no effect for ASM and

ASM8+ devices.

Note: OPX connections are not supported.

1 2 ... 241 242 243 244 245 246 247 248 249 250 251 ... 257 258

Žádné komentáře

Avaya Business Communication Manager 5.0 - Configuration - Devices Uživatelský manuál Strana 246