Avaya Configuring SNMP, BOOTP, DHCP, and RARP Services Uživatelský manuál stáhnout pdf (Strana 103)

Customizing BootP

303542-A Rev 00

4-17

Filtering BootP and DHCP Packets

You can control whether an interface transmits BootP packets, DHCP packets, or

both to a server by configuring filters for these specific packets. You configure this

type of filter by setting the Pass Through Mode parameter in Site Manager. The

default setting is BootP and allows the interface to transmit only BootP packets.

Be sure to change the setting if you want to transmit DHCP messages.

To filter BootP and DHCP packets, complete the tasks in the following table.

6. Set the

Enable/Disable

parameter.

Click on

Help

or see the parameter

description on page A-22

7. Click on

Apply

8. Click on

Done

. You return to the Configuration Manager

window.

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

choose

Protocols

The Protocols menu opens.

2. Choose

. The IP menu opens.

3. Choose

BOOTP

. The BOOTP menu opens.

4. Choose

Relay Agent Interface Table

. The BOOTP Relay Agent Interface Table

window opens.

5. Click on

Pref Serv

. The BOOTP Relay Agent Preferred

Server Table opens.

6. Set the

Pass Through Mode