Avaya Configuring SNMP, BOOTP, DHCP, and RARP Services Uživatelský manuál Strana 135

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 146
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 134
SNMP, BootP, DHCP, and RARP Parameter Descriptions
303542-A Rev 00
A-21
BootP Preferred Server Configuration Parameters
Use the following guidelines to configure BootP and DHCP preferred server
configuration parameters.
Parameter: Relay Agent IP Address
Path: Configuration Manager > Protocols > IP > BOOTP > Relay Agent Interface
Table > Pref Serv > Add
Default: None
Options: Any valid IP address
Function: Specifies the IP interface that receives BOOTREQUEST packets from clients.
Instructions: Enter the IP address of a numbered network interface that you want to receive
BOOTREQUEST or DHCP packets from clients, and then configure this IP
address on the router, if you have not already done so.
Do not specify an unnumbered interface for this parameter.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.8.3.3.1.3
Parameter: Target Server IP Address
Path: Configuration Manager > Protocols > IP > BOOTP > Relay Agent Interface
Table > Pref Serv > Add
Default: None
Options: Any valid IP address
Function: Specifies the address of a server that should receive BOOTREQUEST or DHCP
packets.
Instructions: Enter the IP address of the server that should receive the BOOTREQUEST or
DHCP packets.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.8.3.3.1.4
Zobrazit stránku 134
1 2 ... 130 131 132 133 134 135 136 137 138 139 140 ... 145 146

Komentáře k této Příručce

Žádné komentáře