Avaya Configuring SNMP, BOOTP, DHCP, and RARP Services Uživatelský manuál stáhnout pdf (Strana 96)

Configuring SNMP, BootP, DHCP, and RARP Services

4-10

303542-A Rev 00

Disabling BootP Route Forwarding

By default, the route (interface) through which the router forwards BootP or

DHCP packets to servers on the network is enabled. You can disable BootP or

DHCP packet forwarding through this route by setting the Enable/Disable

parameter to Disable.

To disable BootP router forwarding, complete the tasks in the following table.

7. Click on

Delete

. The BOOTP Relay Agent Forwarding

Table window no longer displays the

address pair.

8. Click on

Done

. You return to the Configuration Manager

window.

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

choose

Protocols

The Protocols menu opens.

2. Choose

. The IP menu opens.

3. Choose

BOOTP

. The BOOTP menu opens.

4. Choose

Relay Agent Interface Table

. The BOOTP Relay Agent Interface Table

window opens. This window lists all the IP

interfaces that you have configured for

BOOTP services on the router.

5. Click on

Forward I/F

. The BOOTP Relay Agent Forwarding

Table window opens.

6. Select the address pair you want.

7. Set the

Enable/Disable

parameter.

Click on

Help

or see the parameter

description on page A-19

8. Click on

Apply

9. Click on

Done

. You return to the Configuration Manager

window.

Site Manager Procedure

(continued)

You do this System responds

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 145 146

Komentáře k této Příručce

Žádné komentáře

Avaya Configuring SNMP, BOOTP, DHCP, and RARP Services Uživatelský manuál Strana 96

Komentáře k této Příručce

Související produkty a manuály pro Sítě Avaya Configuring SNMP, BOOTP, DHCP, and RARP Services