Avaya Configuring SNMP, BOOTP, DHCP, and RARP Services Uživatelský manuál stáhnout pdf (Strana 88)

Configuring SNMP, BootP, DHCP, and RARP Services

4-2

303542-A Rev 00

Customizing BootP Relay Agent Parameters

After you have configured all the IP interfaces for BootP services, you can

configure BootP relay agent parameters for all of these IP interfaces. The BootP

relay agent is responsible for transmitting BOOTREQUEST packets to servers on

the network and for transmitting BOOTREPLY packets to clients.

Disabling and Reenabling BootP

When you enable IP on an interface, BootP is automatically enabled on that

interface and default values are in effect for all BootP parameters (see Appendix B

for parameter defaults).

To disable or reenable BootP, complete the tasks in the following table.

Specifying Maximum Number of Hops from Client to Server

A hop is the logical distance between a source device and a destination device.

Source-device combinations can include a BootP relay agent and a BootP server, a

client and a BootP relay agent, or two BootP relay agents.

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

choose

Protocols

The Protocols menu opens.

2. Choose

. The IP menu opens.

3. Choose

BOOTP

. The BOOTP menu opens.

4. Choose

Relay Agent Interface Table

. The BOOTP Relay Agent Interface Table

window opens. This window lists all the IP

interfaces that you have configured for

BOOTP services on the router.

5. Set the

Enable/Disable

parameter.

Click on

Help

or see the parameter

description on page A-16

6. Click on

Apply

7. Click on

Done

. You return to the Configuration Manager

window.

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 145 146

Komentáře k této Příručce

Žádné komentáře

Avaya Configuring SNMP, BOOTP, DHCP, and RARP Services Uživatelský manuál Strana 88

Komentáře k této Příručce

Související produkty a manuály pro Sítě Avaya Configuring SNMP, BOOTP, DHCP, and RARP Services