Avaya Configuring SNMP, BOOTP, DHCP, and RARP Services Uživatelský manuál Strana 93

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 146
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 92
Customizing BootP
303542-A Rev 00
4-7
To enable BootP on an interface, complete the tasks in the following table.
Specifying Interfaces to Receive and Relay
BOOTREQUEST Packets
You can specify a forwarding route for BOOTREQUEST packets by defining a
relationship between an interface you want to receive BOOTREQUEST packets
and another to transmit BOOTREQUEST packets. When you define this type of
relationship, the interface pair appears in the BootP relay agent forwarding table.
Depending on the configuration of your network, you can specify:
One input IP interface to forward packets to multiple output IP interfaces
Multiple input interfaces to forward to multiple output interfaces
Multiple input interfaces to forward to one output interface
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
click on the connector.
The Edit Connector window opens.
2. Choose
Edit Circuit
. The Circuit Definition window opens.
3. Choose
Protocols
. The Protocols menu opens.
4. Choose
Add
. The Select Protocols window opens.
5. Choose
BOOTP
.
6. Click on
OK
.
7. Choose
File
.
8. Choose
Exit
. You return to the Configuration Manager
window.
Zobrazit stránku 92
1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 145 146

Komentáře k této Příručce

Žádné komentáře