
Configuring SNMP, BootP, DHCP, and RARP Services
3-4
303542-A Rev 00
lock-timeout 2
authentication-traps enabled
type-of-service reliability
scope-delimiter 0x40 (=> This function is not available)
snmp#
Using Site Manager
To disable and reenable SNMP, complete the tasks in the following table.
Enabling and Disabling SNMP Lock Mechanism
The SNMP locking mechanism prohibits the SNMP agent from responding to
multiple network management stations issuing simultaneous SNMP
set
commands to the router.
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose
Protocols
.
The Protocols menu opens.
2. Choose
IP
. The IP menu opens.
3. Choose
SNMP
. The SNMP menu opens.
4. Choose
Globa
l. The Edit SNMP Global Parameters
window opens.
5. Set the
Enable
parameter.
Click on
Help
or see the parameter
description on page A-3
.
6. Click on
OK
. You return to the Configuration Manager
window.
Caution:
When you disable the SNMP agent in dynamic mode, you
immediately prohibit Site Manager from communicating with the router and
will disconnect your Site Manager session.
Komentáře k této Příručce