Avaya Configuring SNMP, BOOTP, DHCP, and RARP Services Uživatelský manuál stáhnout pdf (Strana 106)

Configuring SNMP, BootP, DHCP, and RARP Services

5-2

303542-A Rev 00

Specifying Interfaces to Receive and Relay DHCP Packets

You must specify a forwarding route for DHCP packets by defining a relationship

between an interface you configure to receive DHCP packets and an interface you

want to transmit DHCP packets. When you define this type of relationship, the

interface pair appears in the BootP relay agent forwarding table. For instructions,

see “Specifying Interfaces to Receive and Relay BOOTREQUEST Packets” on

page 4-7.

To allow DCHP operation, be sure to set the Pass Through Mode parameter in the

BOOTP Relay Agent Forwarding Table window to DHCP, or to BOOTP and

DHCP.

To specify interfaces to receive and relay DHCP packets, complete the tasks in the

following table.

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

choose

Protocols

The Protocols menu opens.

2. Choose

. The IP menu opens.

3. Choose

BOOTP

. The BOOTP menu opens.

4. Choose

Relay Agent Interface Table

. The BOOTP Relay Agent Interface Table

window opens. This window lists all the IP

interfaces that you have configured for

BOOTP services on the router.

5. Click on

Forward I/F

. The BOOTP Relay Agent Forwarding

Table window opens.

6. Select the address pair you want.

7. Set the

Pass Through Mode

parameter.

Click on

Help

or see the parameter

description on page A-22

8. Click on

Apply

9. Click on

Done

. You return to the Configuration Manager

window.

1 2 ... 101 102 103 104 105 106 107 108 109 110 111 ... 145 146

Komentáře k této Příručce

Žádné komentáře

Avaya Configuring SNMP, BOOTP, DHCP, and RARP Services Uživatelský manuál Strana 106

Komentáře k této Příručce

Související produkty a manuály pro Sítě Avaya Configuring SNMP, BOOTP, DHCP, and RARP Services