Avaya Configuring WAN Lines Services Uživatelský manuál Strana 115

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 462
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 114
Configuring HSSI Services
308648-14.00 Rev 00
5-3
Enabling or Disabling HSSI Lines
By default, the router enables HSSI line services when you add the circuit. You
can enable or disable this interface without moving the cables.
Using the BCC
To enable or disable HSSI line services, navigate to the hssi prompt (for example,
box
;
hssi/2/1
) and type:
state
variable
For example:
hssi/2/1#
state enabled
hssi/2/1#
state disabled
Using Site Manager
See the Enable parameter on page A-13 for information.
Enabling or Disabling BofL
By default, the router transmits proprietary Ethernet-encapsulated BofL messages
over a point-to-point connection between the local router and a remote peer. The
exchange of BofL messages provides a level of confidence in the point-to-point
connection.
With BofL enabled, the router sends periodic keepalive messages to the remote
peer. If you enable BofL locally, you must also enable BofL on the remote peer.
Nortel Networks recommends that you enable BofL for point-to-point
connections between Nortel Networks routers. However, you must disable BofL if
such a connection occurs through a wide area transport service such as frame relay
or SMDS.
Zobrazit stránku 114
1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 461 462

Komentáře k této Příručce

Žádné komentáře