Avaya Configuring WAN Lines Services Uživatelský manuál stáhnout pdf (Strana 116)

100

101

Configuring WAN Line Services

5-4

308648-14.00 Rev 00

Using the BCC

To enable or disable the transmission of BofL messages, navigate to the hssi

prompt (for example,

box

;

hssi/2/1

) and type:

bofl

variable

For example:

hssi/2/1#

bofl enabled

hssi/2/1#

bofl disabled

Using Site Manager

See the BofL parameter on page A-13 for information.

Setting the BofL Interval

The BofL Frequency (timeout) parameter is valid only if BofL is enabled on the

interface.

After sending a BofL message, the router starts a timer that has a value equal to

five times the setting of this parameter. If the router does not receive a BofL

message from the remote peer before the timer expires, the router disables the

HSSI circuit, and then attempts to restart it.

Both ends of the point-to-point connection must be configured with the same

frequency value.

Set this parameter to a value from 1 to 60 seconds. The default is 1 second.

Using the BCC

To set the BofL timeout, navigate to the hssi prompt (for example,

box

;

hssi/2/1

)

and type:

bofl-timeout

integer

For example:

hssi/2/1#

bofl-timeout 20

1 2 ... 111 112 113 114 115 116 117 118 119 120 121 ... 461 462

Komentáře k této Příručce

Žádné komentáře

Avaya Configuring WAN Lines Services Uživatelský manuál Strana 116

Komentáře k této Příručce

Související produkty a manuály pro Sítě Avaya Configuring WAN Lines Services