Avaya Using Technician Interface Scripts Uživatelský manuál stáhnout pdf (Strana 226)

100

101

Using Technician Interface Scripts

2-174

Sample Display – show csmacd hwﬁlters

Hardware Filters Modules:

-------------------------

Line Maximum Current Used Dropped

Slot Conn Circuit State Type Tbl Siz Tbl Siz Entries Frames

---- ---- -------- -------- ------ ------- ------- ------- ----------

2 1 E21 Down CSMACD 1024 0 0 0

1 entry in table.

receive errors

[

circuit

]

Displays receive errors for all circuits or for a speciﬁc circuit. The table includes the

following information:

Slot Slot identiﬁer; ranges vary according to router model.

Conn Connector’s instance identiﬁer; ranges vary according to router

model and Ethernet module. For routers other than ASN, indicates

the physical connector number on the slot.

Circuit Name of the circuit associated with this line.

Checksum Errors Number of frames received with a CRC error.

Alignment Errors Number of frames received that did not contain an integral number

of octets. Normally a frame alignment error also causes a checksum

error on the frame.

Overﬂow Errors Number of overﬂow errors received on this line in which the device

FIFO buffer overﬂowed before obtaining the next DMA cycle.

Frames Too Long Number of frames received that exceed 1518 octets.

Receive Symbol Errors Number of errors in hardware MLT3 encoding. Indicates a

problem. Only relevant on 100 Mb/s lines.

Internal MAC Receive Errors Number of frames containing less than 64 octets (runt packets).

1 2 ... 221 222 223 224 225 226 227 228 229 230 231 ... 787 788

Komentáře k této Příručce

Žádné komentáře

Avaya Using Technician Interface Scripts Uživatelský manuál Strana 226

Komentáře k této Příručce

Související produkty a manuály pro Software Avaya Using Technician Interface Scripts