Avaya Using Technician Interface Scripts Uživatelský manuál stáhnout pdf (Strana 355)

100

101

show ip

2-303

The base command also displays the number of networks and hosts that IP knows about

and the number of policy rules deﬁned.

Sample Display – show ip base

IP Base Information

-------------------

Protocol State Forwarding Mode Zero Subnetting Default TTL

-------- ----------- -------------------------- --------------- -----------

IP Up Forwarding Disabled 30

Route pools contain 168 networks/subnets and 11 hosts.

Maximum policy rules per type per protocol: 32

circuits [

]

Displays IP circuit information, including which circuits have IP conﬁgured on them, the

IP address for each, and the state of IP on the circuit (Up or Down). IP address 0.0.0.0

indicates that an unnumbered interface is conﬁgured on the circuit. You can also display

this information for a speciﬁc circuit only.

Zero Subnetting Setting that determines whether or not zero subnets are allowed —

Enabled or Disabled. If Enabled, interfaces conﬁgured with a zero subnet

are allowed; if Disabled, they are not.

Default TTL Default value that IP inserts in the Time-To-Live ﬁeld of the IP header in

datagrams that this router originates when the transport layer protocol

does not supply the value. The maximum value is 255 and the default is

30.

1 2 ... 350 351 352 353 354 355 356 357 358 359 360 ... 787 788

Komentáře k této Příručce

Žádné komentáře

Avaya Using Technician Interface Scripts Uživatelský manuál Strana 355

Komentáře k této Příručce

Související produkty a manuály pro Software Avaya Using Technician Interface Scripts