Avaya Configuring IP, ARP, RIP, and OSPF Services Uživatelský manuál Strana 128

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 362
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 127
Configuring IP, ARP, RIP, and OSPF Services
4-10
117356-E Rev 00
Using the BCC
To enable or disable the ARP cache timeout feature, navigate to the IP interface
prompt (for example,
box; eth 2/2; ip/2.2.2.2/255.255.0.0
) and enter:
host-cache-aging
<action>
action
is one of the following:
cache-off
(default)
cache120
cache180
cache240
cache300
cache600
cache900
cache1200
For example, the following command causes IP to time out entries from the
address-resolution cache on IP interface 2.2.2.2 after 300 seconds:
ip/2.2.2.2# host-cache-aging cache300
ip/2.2.2.2#
Using Site Manager
To enable or disable the ARP cache timeout feature, complete the following tasks:
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose
Protocols
.
The Protocols menu opens.
2. Choose
IP
. The IP menu opens.
3. Choose
Interfaces
. The IP Interface List window opens.
4. Click on the interface that you want to edit. Site Manager displays the parameter
values for that interface in the IP Interface
List window.
(continued)
Zobrazit stránku 127
1 2 ... 123 124 125 126 127 128 129 130 131 132 133 ... 361 362

Komentáře k této Příručce

Žádné komentáře