
Configuring IP, ARP, RIP, and OSPF Services
A-44
117356-E Rev 00
Parameter: Dead Interval
Path: Configuration Manager > Protocols > IP > OSPF/MOSPF > Interfaces
Default: 40 seconds
Options: 1 to 2,147,483,647 seconds
Function: Indicates the number of seconds that a router’s Hello packets have not been
seen before its neighbors declare the router down. The dead interval value
should be some multiple of the Hello interval value. Bay Networks suggests
the following values for this parameter: for broadcast, 40 seconds; for
point-to-point, 60 seconds; for NBMA, 80 seconds; for point-to-multipoint,
60 seconds.
Instructions: Either accept the default value of 40 seconds or set the dead interval to a
higher number for slower-speed serial lines. This value must be the same for
all routers attached to the same network
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.3.5.1.12
Parameter: Poll Interval
Path: Configuration Manager > Protocols > IP > OSPF/MOSPF > Interfaces
Default: 120 seconds
Options: 1 to 2,147,483,647 seconds
Function: Indicates the largest number of seconds allowed between Hello packets sent to
an inactive NBMA neighbor.
Instructions: Either accept the default value of 120 seconds or set this parameter to a slightly
higher number for slower-speed serial lines.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.3.5.1.13
Komentáře k této Příručce